Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

Bộ phát tín hiệu xác định nồng độ khí
Xem hình đầy đủ

Bộ phát tín hiệu xác định nồng độ khí

( Manufacturer )
Call for Pricing

The RKI low cost CO/H2S transmitter is a highly reliable and very cost effective basic 4-20 mA transmitter for the detection of carbon monoxide and hydrogen sulfide. The electronics are protected inside a plastic enclosure to avoid damage from mechanical abuse, water, dust or corrosion. Sensors for H2S and CO are long life and typically last 2 - 3 years.

The transmitter operates from 24 VDC (11VDC to 30 VDC), and provides a 4-20 mA signal which can be connected to a wide variety of controllers. The low cost CO/H2S can be used either indoors or in semi-enclosed areas.

The only tools required to calibrate the low cost CO/H2S transmitter are a voltmeter, screwdriver, and calibration gas. The zero and calibration functions are performed by adjusting potentiometers on the amplifier board. The amplifier board has test jacks for the connection of a voltmeter for calibration purposes, and the sensor response is viewed on the voltmeter as a 100mV to 500mV signal. Field calibration can be performed easily and quickly by one person.


  • Water/dust resistant housing
  • Available for H2S and CO
  • Long life sensors (2 + years typical)
  • Competitively priced
  • Compact design


  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Loading docks


Part # H2S
Min Operating
11 VDC
Max Operating
30 VDC
Max Current
25 mA
(2 wire system)
Signal Output 4 mA at 0 ppm H2S
20 mA at 100 ppm H2S
4 mA at 0 ppm CO
20 mA at 300 ppm CO
20 seconds to 90%
of concentration
45 seconds to 90% of concentration
Operating Environment
Location Indoors or semi-enclosed areas
Temperature 0 to 120° F
Humidity 0 - 99% RH,
non condensing
Housing Plastic, water / dust resistant enclosure
2.5" W x 4.0" H x 1.5" D
Type Electrochemical
Life Expectancy 2 years normal service when intermittently exposed to H2S 2 to 3 years normal service
Zero Sets transmitter output to 4 mA with zero output from H2S sensor Sets transmitter output to 4 mA with zero output from CO sensor
Span Sets transmitter output to 20 mA with 100 ppm output from H2S sensor Sets transmitter output to 20 mA with 300 ppm output from CO
Tools Needed Screwdriver and voltmeter used to make adjustments

* Specifications subject to change without notice.
Made in the USA

Bình luận của khách:

Chưa có bình luận nào cho sản phẩm này.
Hãy login rồi viết bình luận.

Danh mục sản phẩm

Hỗ trợ trực tuyến

Hỗ trợ bán hàng


Hỗ trợ kỹ thuật


My status

Tin tức

article thumbnail

Thông số kỹ thuật: + Dung tích: phi 25. 

article thumbnail

Hệ thống chiết suất siêu tới hạn (SFE 

article thumbnail

Tổng quát
Khí Carbon Monoxide (CO), là m 

article thumbnail

APTECH trở thành nhà phân phối độc quy 


mod_vvisit_counterOnline Users28
You are here: Home Thiết bị môi trường Thiết bị kiểm tra khí thải, khí độc, ánh sáng, độ ồn ...